Print this page

A107

Rate this item
(1 Vote)

A107 SINGLE ACTING PISTON SEAL

  • EASY INSTALLATION
  • VERY ECONOMIC
  • SUITABLE TO WORK EVEN LOW PRESSURES
  • SUITABLE TO WORK EVEN POOR SURFACES      
  • SIMPLE GROOVE DESIGN

General Properties

A107

Technical Properties

 

A107 SINGLE ACTING PISTON AND ROD SEAL

A107 single acting seal is designed to be used for hydraulic cylinders and rod or piston applications.

A107 piston and rod seal manufactured with high specification ALP 80 shore NBR compound and NBR impregnated cotton to help extrusions.                                                                                      

A107 offers suitability to work even under low pressures and poor surfaces, very economic sealing solution, easy installation and simple low height groove design.                          

A107 piston seal is recommend to be used with min one ALP guidening element combination such as A251, A254, A255, A256, depending on the working conditions.                                                   

A107 single acting seals to be used for low to medium duty hydraulic cylinders, commonly used for mobile hydraulics and presses.                                                                                            

Please do not hesitate to send us an email if you have any queries This email address is being protected from spambots. You need JavaScript enabled to view it.

 

TECHNICAL DATA
Working Pressure 250 Bar
Working Temperature -30 +105
Sliding Speed 0.5 m/sn
Material 80 NBR + Bezli NBR
Media Mineral Base Hydraulic Oil
 
Surface Roughness
  Ra Rmax
Dynamic Surface ≤0.3 μm ≤3 μm
Groove Base ≤1.8 μm ≤10 μm
Groove Flanks ≤3.2 μm ≤16 μm
 
Permissible Gap (max.) for NBR
Working Pressure S (mm)
150 0.2
250 0.1
Read 171309 times Last modified on Thursday, 09 June 2016 14:21