Print this page

A201

Rate this item
(0 votes)

A201 SINGLE ACTING PU WIPER SEAL

  • PROVIDES EXCELLENT WIPING PERFORMANCE
  • VERY GOOD PROTECTION AGAINST OUTSIDE DIRT PARTICLES
  • HELP SEALING EFFECT TO SYSTEM WITH SECONDARY LIP
  • SIMPLE GROOVE DESIGN
  • EASY INSTALLATION
  • HIGH WEAR RESISTANCE
  • LONG SERVICE LIFE
  • VERY ECONOMIC
  • WIDE RANGE DIMENSIONS AVAILABLE

General Properties

A201

Technical Properties

A201 SINGLE ACTING PU WIPER SEAL

ALP A201 wiper seal has one robust big inner lip and one small secondary sealing lip and is to be used for medium to heavy duty cylinders for rod applications to provide simple and effective wiping action to remove the dirt and water from the rod. The secondary lip enhances the effectiveness of the sealing system by preventing dust, fluid or other types of contamination from reaching the sealing system through the rod and causing damage to internal cylinder components.   

A201 single acting wiper seal is manufactured with high specification special 92 shore ALP PU compound as standard and could be manufactured with ALP FKM compound for extreme working conditions on your demand. Please contact our sales team for pricing and lead time. This email address is being protected from spambots. You need JavaScript enabled to view it.

A201 single-acting rod wiper is recommended to be used in conjunction with a suitable ALP rod seal please check our rod seals section.

Wide range of sizes available on Exstock.

ALP A201 wiper seal offers very effective wiping performance, and protection against outside dirt particles such as dust, sand, mud and water, with the secondary lip enhances the effectiveness of the sealing system. The seal has very good wear resistance, a long service life, is easy to install, and has a simple groove design.

A201 single acting single lip wiper seal is to be used safely for earth moving machinery, agricultural machinery, telescopic cylinders, cranes, mining equipment, moving platforms and any medium to heavy duty cylinders.

 
TECHNICAL DATA
Working Temperature -30 +100
Sliding Speed 1.00 m/sn
Material 92 PU
 
Surface Roughness
  Ra Rmax
Dynamic Surface ≤0.4 μm ≤3.2 μm
Groove Base ≤1.6 μm ≤10 μm
Groove Flanks ≤3.2 μm ≤16 μm

 

Read 95147 times Last modified on Monday, 11 April 2016 10:34