A801 DOUBLE ACTING COMPLETE PNEUMATIC PISTON

ALP A801 complete pneumatic piston is designed to be used especially for short stroke pneumatic iron and aluminium cylinders as a complete piston.

A801 double acting complete piston is manufactured with high specification special 80 shore ALP NBR compound, double cup seal, and 80 shore NBR vulcanised metal disc support as standard and could be manufactured with ALP FKM compound for extreme working conditions on your demand. Please contact our sales team for pricing and lead time, This email address is being protected from spambots. You need JavaScript enabled to view it..

Wide range of sizes available on Exstock.

ALP A801 complete piston offers a versatile design that accommodates nearly all cylinder types, excellent sealing and guidening performance at the same time, very good wear resistance, easy installation to piston rod without using other sealing elements, ideal corrosion protection because of elastomer covering, immediate full pressure response because of special design and is suitable for oiled or oil-free working conditions (note that the seal should be lubricated on assembly).

A801 double acting piston seal is to be used safely for pneumatic cylinders with or without using cushioning.

A404 COVER SEAL FOR PISTON

ALP A404 cover seals are designed especially to be used for static sealing of hydraulic cylinders where the O-Ring is used as a static seal.

A404 static cover seal is manufactured with special high specification 92 shore ALP PU compound as standard and could be manufactured with endurance grade 95 shore ALP PU compound or ALP FKM compound for extreme working conditions on your demand. Please contact our sales team for pricing and lead time.

Wide range of sizes available on Exstock.

A404 cover seal offers reliable sealing performance, resistance to high wear and high pressures.

A404 static cover seal is to be used safely for hydraulic cylinders and any static sealing applications instead of an O-Ring.

A403 COVER SEAL FOR ROD

ALP A403 cover seals are designed especially to be used for static sealing of hydraulic cylinders where the O-Ring is used as the static seal.

A403 static cover seal is manufactured with special high specification 92 shore ALP PU compound as standard and could be manufactured with endurance grade 95 shore ALP PU compound or ALP FKM compound for extreme working conditions on your demand. Please contact our sales team for pricing and lead time.

Wide range of sizes available on Exstock.

A403 cover seal offers reliable sealing performance, resistance to high wear and high pressures.

A403 static cover seal is to be used safely for hydraulic cylinders and any static sealing applications instead of an O-Ring.

A402 FLANGE SEAL

ALP A402 flange seals are designed especially to be used for static sealing of SAE J518 flanges and valves.

A402 static seal is manufactured with special high specification 92 shore ALP PU compound as standard and could be manufactured with endurance grade 95 shore ALP PU compound or ALP FKM compound for extreme working conditions on your demand. Please contact our sales team for pricing and lead time.

Wide range of sizes available on Exstock.

A402 flange seal offers reliable sealing performance for the flange and very good resistance to high wear.

A402 static seal prevents pumping and high pressures in the system so you can see these common problems where O rings are used in applications.

 A402 static flange seals to be used safely for SAE J518 flanges and valve blocks.

A311 SINGLE ACTING PTFE ROD SEAL

A311 PTFE rod seal is designed to be used with medium to heavy duty hydraulic cylinder and rod applications.

A311 PTFE rod seal is manufactured with bronze filled special ALP PTFE compound and 70 shore NBR energising O ring as standard. The O ring could be replaced on demand if different oils other than mineral oil need to be used. Please contact our sales department for pricing.

A311 PTFE rod seal offers ultra-low friction, free of stick-sleep, suitability for high speed and simple grove designs and a long service life.

A311 PTFE rod seal is recommend to be used with ALP U ring lip sealing element combination such as A151, A152, A153, and A157.

Wide range of metric and imperial dimensions available on Exstock.

A311 PTFE rod seal is to be used safely for agricultural machinery, steel industry, injection moulding machinery and any large dimension cylinders.

Please do not hesitate to send us an email if you have any queries This email address is being protected from spambots. You need JavaScript enabled to view it. …

A307 DOUBLE ACTING PTFE ROTARY PISTON SEAL

A307 two piece PTFE rotary seal is designed to be used with medium to high duty hydraulic cylinders for rotary applications.

A307 PTFE double acting piston seal is manufactured with bronze filled special ALP PTFE compound and 70 shore NBR energising O ring as standard. The O ring could be replaced on demand if different oils other than mineral oil need to be used. Please contact our sales department for pricing.

A307 two piece PTFE piston seal offers ultra-low friction, free of stick-sleep, suitability for high speed and simple grove designs, imperviousness under high pressure in rotary applications and a long service life.

A307 Ptfe piston seal is recommend to be used with min one ALP guidening element combination such as A251, A254, A255, A256, depending on the working conditions.

Wide range of metric and imperial dimensions available on Exstock.

A307 PTFE piston seal is to be used safely for rotary applications on mobile hydraulic cylinders and grippers.

A305 SINGLE ACTING PTFE WIPER SEAL

A305 two piece PTFE wiper seal is designed to be used for medium to heavy duty hydraulic cylinders and rod applications to prevent dust, fluid or other types of contaminations from reaching the sealing system through the rod and causing damage to internal cylinder components.

A305 PTFE wiper seal is manufactured with bronze filled special ALP PTFE compound and 70 shore NBR energising O ring as standard. The O ring could be replaced on demand if different oils other than mineral oil need to be used. Please contact our sales department for pricing.

A305 PTFE rod wiper seal offers very effective wiping and scraping performance, and protection against outside dirt particles such as dust, sand, mud, ice and water. Also is ultra-low friction, free of stick-sleep and suitability for high speed and simple grove designs.

A305 PTFE single-acting rod wiper is recommended to be used in conjunction with a suitable ALP rod seals please check our rod seals section.

Wide range of metric and imperial dimensions available on Exstock.

A305 PTFE rod wiper seal is to be used safely for agricultural machinery, steel industry, injection moulding machinery, mobile hydraulics and any large dimension cylinders.

Please do not hesitate to send us an email if you have any queries This email address is being protected from spambots. You need JavaScript enabled to view it. …

A304 DOUBLE ACTING PTFE ROTARY ROD SEAL

A304 two piece PTFE rotary seal is designed to be used for medium to high duty hydraulic cylinders for rotary applications.

A304 PTFE double acting rod seal is manufactured with bronze filled special ALP PTFE compound and 70 shore NBR energising O ring as standard. The O ring could be replaced on demand if different oils other than mineral oil need to be used. Please contact our sales department for pricing.

A304 two piece PTFE rod seal offers Ultra low friction, free of stick-sleep, suitability to high sliding speed and simple grove design and long service life, provide imperviousness under high pressure in rotary applications.

A304 PTFE rod seal offers ultra-low friction, free of stick-sleep, suitability for high speed and simple grove designs and a long service life.

Wide range of metric and imperial dimensions available on Exstock.

A304 PTFE rod seal is to be used safely for rotary applications on mobile hydraulic cylinders and grippers.

Please do not hesitate to send us an email if you have any queries This email address is being protected from spambots. You need JavaScript enabled to view it. …

A302 SINGLE ACTING PTFE PISTON SEAL

A302 two piece PTFE piston seal is designed to be used for medium to high duty hydraulic and pneumatic cylinders, piston and valve applications.

A302 PTFE single acting piston seal is manufactured with bronze filled special ALP PTFE compound and 70 shore NBR energising O ring as standard. The O ring could be replaced on demand if different oils other than mineral oil need to be used. Please contact our sales department for pricing.

A302 PTFE piston seal offers ultra-low friction, free of stick-sleep, suitability for high speed and simple grove designs and a long service life.

A302 PTFE piston seal is recommend to be used with min one ALP guidening element combination such as A251, A254, A255, A256, depending on the working conditions.

Wide range of metric and imperial dimensions available on Exstock.

A302 PTFE piston seal is to be used safely for agricultural machinery, forklifts, platforms, steel industry, injection moulding machinery and any hydraulic and pneumatic cylinders, cranes and valves.

Please do not hesitate to send us an email if you have any queries This email address is being protected from spambots. You need JavaScript enabled to view it. …

A301 DOUBLE ACTING PTFE PISTON SEAL

A301 PTFE piston seal is designed to be used for medium to high duty hydraulic and pneumatic cylinder, piston and valve applications.

A301 PTFE seal is manufactured with bronze filled special alp PTFE compound and 70 shore NBR energising O ring as standard and the O ring could be replaced on demand if different oils other than mineral oil need to be used. Please contact our sales department for pricing.

A301 PTFE piston seal offers ultra-low friction, free of stick-sleep, suitability for high speed and simple grove designs and a long service life.

ALP A301 two piece PTFE piston seal is recommended to be used with min one ALP guidening element combination such as A251, A254, A255, A256, depending on the working conditions.

Wide range of metric and imperial dimensions available on Exstock.

A301 PTFE piston seal is to be used safely for agricultural machinery, steel industry, injection moulding machinery and any hydraulic and pneumatic cylinders, cranes and valves.

Please do not hesitate to send us an email if you have any queries This email address is being protected from spambots. You need JavaScript enabled to view it. …