A123 ECONOMIC DOUBLE ACTING PISTON SEAL
- VERY GOOD SEALING PERFORMANCE
- EASY ONE PIECE INSTALLATION
- VERY ECONOMIC
- SUITABLE TO WORK EVEN LOW PRESSURES
- SUITABLE TO STANDARD HOUSINGS
- SUITABLE FOR HYDRAULIC AND PNEUMATIC CYLINDERS
General Properties
Technical Properties
A123 ECONOMIC DOUBLE ACTING PISTON SEAL
A123 double acting piston seal is designed to be used for light duty hydraulic and pneumatic cylinders and piston applications.
A123 economic piston seal is manufactured with special alp 98 shore PU compound and 70 shore NBR energising O ring as standard.
A123 piston seal offers very good and economic static and dynamic sealing performance, suitable for even low speed working conditions and simple low height grove design, suitable for standard housings, easy one piece installation and can also be used with pneumatic cylinders as a piston seal.
Wide range of metric and imperial dimensions available on Exstock.
ALP A123 two piece double acting piston seal to be used safely for any light duty industry hydraulic or pneumatic cylinders.
Please do not hesitate to send us an email if you have any queries This email address is being protected from spambots. You need JavaScript enabled to view it. …
|
TECHNICAL DATA |
Working Pressure |
250 Bar |
Working Temperature |
-30 +100 |
Sliding Speed |
0.5 m/sn |
Material |
98 PU + 70 NBR |
Media |
Mineral Base Hydraulic Oil |
|
|
Surface Roughness |
|
Ra |
Rmax |
Dynamic Surface |
≤0.4 μm |
≤3.2 μm |
Groove Base |
≤1.6 μm |
≤6.3 μm |
Groove Flanks |
≤3.2 μm |
≤16 μm |
Permissible Gap (max.) |
0.25 mm |
|
|
|